Table of Contents
246.870-1 Definition. Authorized supplier, as used in this subpart, means a supplier, distributor, or an aftermarket manufacturer with a contractual arrangement with, or the express written authority of, the original manufacturer or current design activity to buy, stock, repackage, sell, or distribute the part.
(Revised October 29, 2010)
Discipline Working Group, as used in this subpart, is defined in the clause at 252.246-7004, Safety of Facilities, Infrastructure, and Equipment for Military Operations.
Departments and agencies shall also—
(1) Develop and manage a systematic, cost-effective Government contract quality assurance program to ensure that contract performance conforms to specified requirements. Apply Government quality assurance to all contracts for services and products designed, developed, purchased, produced, stored, distributed, operated, maintained, or disposed of by contractors.
(2) Conduct quality audits to ensure the quality of products and services meet contractual requirements.
(3) Base the type and extent of Government contract quality assurance actions on the particular acquisition.
(4) Provide contractors the maximum flexibility in establishing efficient and effective quality programs to meet contractual requirements. Contractor quality programs may be modeled on military, commercial, national, or international quality standards.
(1) The contracting office must coordinate with the quality assurance activity before changing any quality requirement.
(2) The activity responsible for technical requirements may prepare instructions covering the type and extent of Government inspections for acquisitions that are complex, have critical applications, or have unusual requirements. Follow the procedures at PGI 246.103(2) for preparation of instructions.
(Revised June 25, 2013)
(1) Higher-level contract quality requirements are used in addition to a standard inspection requirement.
(2) Higher-level contract quality requirements, including nongovernment quality system standards adopted to meet DoD needs, are listed in the DoD Index of Specifications and Standards.
This section implements section 807 of the National Defense Authorization Act for Fiscal Year 2010 (Pub. L. 111-84). It establishes policies and procedures intended to ensure the safety and habitability of facilities, infrastructure, and equipment acquired for use by DoD military or civilian personnel during military operations performed outside the United States, Guam, Puerto Rico, and the Virgin Islands.
(a) Contracts (including task and delivery orders) for the construction, installation, repair, maintenance, or operation of facilities, infrastructure, and equipment configured for occupancy, including but not limited to, existing host nation facilities, new construction, and relocatable buildings acquired for use by DoD military or civilian personnel, shall require a pre-occupancy safety and habitability inspection.
(b) To minimize safety and health risks, each contract covered by this policy shall require the contractor s compliance with the Unified Facilities Criteria (UFC) 1-200-01 and its referenced standards for—
Waste disposal; and
(c) Existing host nation facilities constructed to standards equivalent to or more stringent than UFC 1-200-01 are acceptable upon a written determination of the acceptability of the standards by the Discipline Working Group.
(d) Inspections to ensure compliance with UFC 1-200-01 standards shall be conducted in accordance with the inspection clause of the contract.
The combatant commander may waive compliance with the foregoing standards when it is impracticable to comply with such standards under prevailing operational conditions.
Use the clause at 252.246-7004, Safety of Facilities, Infrastructure, and Equipment for Military Operations, in solicitations and contracts, including solicitations and contracts using FAR part 12 procedures for the acquisition of commercial items, for the construction, installation, repair, maintenance, or operation of facilities, infrastructure, or for equipment configured for occupancy, planned for use by DoD military or civilian personnel during military operations.
(Revised December 21, 2018)
(a) Use the clause at 252.246-7003, Notification of Potential Safety Issues, in solicitations and contracts, including solicitations and contracts using FAR part 12 procedures for the acquisition of commercial items, for the acquisition of—
(1) Repairable or consumable parts identified as critical safety items;
(2) Systems and subsystems, assemblies, and subassemblies integral to a system; or
(3) Repair, maintenance, logistics support, or overhaul services for systems and subsystems, assemblies, subassemblies, and parts integral to a system.
(Revised December 21, 2018)
The requirement for a quality assurance surveillance plan shall be addressed and documented in the contract file for each contract except for those awarded using simplified acquisition procedures. For contracts for services, the contracting officer should prepare a quality assurance surveillance plan to facilitate assessment of contractor performance, see 237.172. For contracts for supplies, the contracting officer should address the need for a quality assurance surveillance plan.
Do not require Government contract quality assurance at source for contracts ordelivery orders valued below $300,000, unless—
(1) Mandated by DoD regulation;
(2) Required by a memorandum of agreement between the acquiring department or agency and the contract administration agency; or
(3) The contracting officer determines that—
(i) Contract technical requirements are significant (e.g., the technical requirements include drawings, test procedures, or performance requirements);
(ii) The product being acquired—
(A) Has critical characteristics;
(B) Has specific features identified that make Government contract quality assurance at source necessary; or
(C) Has specific acquisition concerns identified that make Government contract quality assurance at source necessary; and
(iii) The contract is being awarded to—
(A) A manufacturer or producer; or
(B) A non-manufacturer or non-producer and specific Government verifications have been identified as necessary and feasible to perform.
Do not require Government contract quality assurance at source for contracts or delivery orders valued at or below the simplified acquisition threshold unless the criteria at 246.402 have been met.
(1) Quality assurance among North Atlantic Treaty Organization (NATO) countries.
(i) NATO Standardization Agreement (STANAG) 4107, Mutual Acceptance of Government Quality Assurance and Usage of the Allied Quality Assurance Publications—
(A) Contains the processes, procedures, terms, and conditions under which one NATO member nation will perform quality assurance for another NATO member nation or NATO organization;
(B) Standardizes the development, updating, and application of the Allied Quality Assurance Publications; and
(C) Has been ratified by the United States and other nations in NATO with certain reservations identified in STANAG 4107.
(ii) Departments and agencies shall follow STANAG 4107 when—
(A) Asking a NATO member nation to perform quality assurance; or
(B) Performing quality assurance when requested by a NATO member nation or NATO organization.
(2) International military sales (non-NATO). Departments and agencies shall—
(i) Perform quality assurance services on international military sales contracts or in accordance with existing agreements;
(ii) Inform host or U.S. Government personnel and contractors on the use of quality assurance publications; and
(iii) Delegate quality assurance to the host government when satisfactory services are available.
(3) Reciprocal quality assurance agreements. A Memorandum of Understanding (MOU) with a foreign country may contain an annex that provides for the reciprocal performance of quality assurance services. MOUs should be checked to determine whether such an annex exists for the country where a defense contract will be performed. (See Subpart 225.8 for more information about MOUs.)
(f) If nonconforming material or services are discovered after acceptance, the defect appears to be the fault of the contractor, any warranty has expired, and there are no other contractual remedies, the contracting officer—
(i) Shall notify the contractor in writing of the nonconforming material or service;
(ii) Shall request that the contractor repair or replace the material, or perform the service, at no cost to the Government; and
(iii) May accept consideration if offered. For guidance on solicitation of a refund, see Subpart 242.71.
(S-70) The head of the design control activity is the approval authority for acceptance of any nonconforming aviation or ship critical safety items or nonconforming modification, repair, or overhaul of such items (see 209.270). Authority for acceptance of minor nonconformances in aviation or ship critical safety items may be delegated as determined appropriate by the design control activity. See additional information at PGI 246.407.
(a) The Surgeons General of the military departments are responsible for—
(1) Acceptance criteria;
(2) Technical requirements; and
(3) Inspection procedures needed to assure wholesomeness of foods.
(b) The contracting office may designate any Federal activity, capable of assuring wholesomeness and quality in food, to perform quality assurance for subsistence contract items. The designation may—
(1) Include medical service personnel of the military departments; and
(2) Be on a reimbursable basis.
(a) The Federal Aviation Administration (FAA) has certain responsibilities and prerogatives in connection with some commercial aircraft and of aircraft equipment and accessories (Pub. L. 85-726 (72 Stat 776, 49 U.S.C. 1423)). This includes the issuance of various certificates applicable to design, manufacture, and airworthiness.
(b) FAA evaluations are not a substitute for normal DoD evaluations of the contractor's quality assurance measures. Actual records of FAA evaluations may be of use to the contract administration office (CAO) and should be used to their maximum advantage.
(c) The CAO shall ensure that the contractor possesses any required FAA certificates prior to acceptance.
(a) Under the clause at FAR 52.246-2, Inspection of Supplies—Fixed-Price, after considering the factors in paragraph (c) of this subsection, the quality assurance representative (QAR) may believe that the assessment of additional costs is warranted. If so, the representative shall recommend that the contracting officer take the necessary action and provide a recommendation as to the amount of additional costs. Costs are based on the applicable Federal agency, foreign military sale, or public rate in effect at the time of the delay, reinspection, or retest.
(b) If the contracting officer agrees with the QAR, the contracting officer shall—
(1) Notify the contractor, in writing, of the determination to exercise the Government's right under the clause at FAR 52.246-2, Inspection of Supplies--Fixed-Price; and
(2) Demand payment of the costs in accordance with the collection procedures contained in FAR Subpart 32.6.
(c) In making a determination to assess additional costs, the contracting officer shall consider—
(1) The frequency of delays, reinspection, or retest under both current and prior contracts;
(2) The cause of such delay, reinspection, or retest; and
(3) The expense of recovering the additional costs.
The contract administration office shall establish a system for the collection, evaluation, and use of the types of quality evaluation data specified in PGI 246.470-2.
(1) Ordinarily, a representative of the contract administration office signs or stamps the shipping papers that accompany Government source-inspected supplies to release them for shipment. This is done for both prime and subcontracts.
(2) An alternative procedure (see paragraph (b) of this section) permits the contractor to assume the responsibility for releasing the supplies for shipment.
(3) The alternative procedure may include prime contractor release of supplies inspected at a subcontractor's facility.
(4) The use of the alternative procedure releases DoD manpower to perform technical functions by eliminating routine signing or stamping of the papers accompanying each shipment.
(b) Alternative Procedures—Contract Release for Shipment.
(1) For foreign military sales contracts, do not use alternative procedures.
(2) The contract administration office may authorize, in writing, the contractor to release supplies for shipment when—
(i) The stamping or signing of the shipping papers by a representative of the contract administration office interferes with the operation of the Government contract quality assurance program or takes too much of the Government representative's time;
(ii) There is sufficient continuity of production to permit the Government to establish a systematic and continuing evaluation of the contractor's control of quality; and
(iii) The contractor has a record of satisfactory quality, including that pertaining to preparation for shipment.
(3) The contract administration office shall withdraw, in writing, the authorization when there is an indication that the conditions in paragraph (b)(2) of this section no longer exist.
(4) When the alternative procedure is used, require the contractor to—
(i) Type or stamp, and sign, the following statement on the required copy or copies of the shipping paper(s), or on an attachment—
The supplies in this shipment—
This shipment was—
(ii) Release and process, in accordance with established instructions, the DD Form 250, Material Inspection and Receiving Report, or other authorized receiving report.
(a) DoD quality inspection approval marking designs (stamps) may be used for both prime contracts and subcontracts. Follow the procedures at PGI 246.472(a) for use of DoD inspection stamps.
(b) Policies and procedures regarding the use of National Aeronautics and Space Administration (NASA) quality status stamps are contained in NASA publications. When requested by NASA centers, the DoD inspector shall use NASA quality status stamps in accordance with current NASA requirements.
(Revised January 10, 2008)
Before authorizing a certificate of conformance for aviation or ship critical safety items, obtain the concurrence of the head of the design control activity (see 209.270).
(Revised May 12, 2006)
See Appendix F, Material Inspection and Receiving Report, for procedures and instructions for the use, preparation, and distribution of—
(1) The Material Inspection and Receiving Report (DD Form 250 series); and
(2) Supplier's commercial shipping/packing lists used to evidence Government contract quality assurance.
(Revised March 25, 2016)
As used in this subpart—
Acceptance, as used in this subpart and in the warranty clauses at FAR 52.246-17, Warranty of Supplies of a Noncomplex Nature; FAR 52.246-18, Warranty of Supplies of a Complex Nature; FAR 52.246-19, Warranty of Systems and Equipment Under Performance Specifications or Design Criteria; and FAR 52.246-20, Warranty of Services, includes the execution of an official document (e.g., DD Form 250, Material Inspection and Receiving Report) by an authorized representative of the Government.
Defect means any condition or characteristic in any supply or service furnished by the contractor under the contract that is not in compliance with the requirements of the contract.
Enterprise means the entity (e.g., a manufacturer or vendor) responsible for granting the warranty and/or assigning unique item identifiers to serialized warranty items.
Enterprise identifier means a code that is uniquely assigned to an enterprise by an issuing agency.
Issuing agency means an organization responsible for assigning a globally unique identifier to an enterprise, as indicated in the Register of Issuing Agency Codes for International Standards Organization/International Electrotechnical Commission 15459, located at http://www.aimglobal.org/?Reg_Authority15459.
Serialized item means each item produced is assigned a serial number that is unique among all the collective tangible items produced by the enterprise, or each item of a particular part, lot, or batch number is assigned a unique serial number within that part, lot, or batch number assignment within the enterprise identifier. The enterprise is responsible for ensuring unique serialization within the enterprise identifier or within the part, lot, or batch numbers, and that serial numbers, once assigned, are never used again.
Unique item identifier means a set of data elements marked on an item that is globally unique and unambiguous.
Warranty tracking means the ability to trace a warranted item from delivery through completion of the effectivity of the warranty.
(1) The chief of the contracting office must approve use of a warranty, except in acquisitions for—
(i) Commercial items (see FAR 46.709);
(ii) Technical data, unless the warranty provides for extended liability (see 246.708);
(iii) Supplies and services in fixed-price type contracts containing quality assurance provisions that reference higher-level contract quality requirements (see 246.202-4); or
(iv) Supplies and services in construction contracts when using the warranties that are contained in Federal, military, or construction guide specifications.
(2) The chief of the contracting office shall approve the use of a warranty only when the benefits are expected to outweigh the cost.
(a) In addition to the exceptions provided in FAR 46.705(a), warranties in the clause at 252.246-7001, Warranty of Data, may be used in cost-reimbursement contracts.
(b)(5) Markings. For non-commercial items, use MIL-STD-129, Marking for Shipments and Storage, and MIL-STD-130, Identification Marking of U.S. Military Property, when marking warranty items.
Obtain warranties on technical data when practicable and cost effective. Consider the factors in FAR 46.703 in deciding whether to obtain warranties of technical data. Consider the following in deciding whether to use extended liability provisions—
(1) The likelihood that correction or replacement of the nonconforming data, or a price adjustment, will not give adequate protection to the Government; and
(2) The effectiveness of the additional remedy as a deterrent against furnishing nonconforming data.
(1) Use a clause substantially the same as the basic or one of the alternates of the clause at 252.246-7001, Warranty of Data, in solicitations and contracts that include the clause at 252.227-7013, Rights in Technical Data and Computer Software, when there is a need for greater protection or period of liability than provided by the inspection and warranty clauses prescribed in FAR part 46.
(i) Use the basic clause in solicitations and contracts that are not firm-fixed price or fixed-price incentive.
(ii) Use alternate I in fixed-price-incentive solicitations and contracts.
(iii) Use alternate II in firm-fixed-price solicitations and contracts.
(2) Use the clause at 252.246-7002, Warranty of Construction (Germany), instead of the clause at FAR 52.246-21, Warranty of Construction, in solicitations and contracts for construction when a fixed-price contract will be awarded and contract performance will be in Germany.
(3) When the solicitation includes the clause at 252.211-7003, Item Unique Identification and Valuation, which is prescribed in 211.274-6(a), and it is anticipated that the resulting contract will include a warranty for serialized items—
(i) Use the provision at 252.246-7005, Notice of Warranty Tracking of Serialized Items, in the solicitation if the Government does not specify a warranty and offerors will be required to enter data with the offer;
(ii) Use the clause at 252.246-7006, Warranty Tracking of Serialized Items, in the solicitation and contract; and
(iii) Include the following warranty attachments, available at https://www.pdrep.csd.disa.mil/pdrep_files/other/wsr.htm, in the solicitation and contract and see 246.710-70:
(A) Warranty Tracking Information.
(B) Source of Repair Instructions.
Follow the procedures at PGI 246.710-70 regarding warranty attachments.
(Revised May 4, 2018)
(a) Partially implements section 818(c) and (e) of the National Defense Authorization Act for Fiscal Year 2012 (Pub. L. 112-81), as amended by section 817 of the National Defense Authorization Act for Fiscal Year 2015 (Pub. L. 113-291) and section 885 of the National Defense Authorization Act for Fiscal Year 2016 (Pub. L. 114-92); and
(b) Prescribes policy and procedures for preventing counterfeit electronic parts and suspect counterfeit electronic parts from entering the supply chain when procuring electronic parts or end items, components, parts, or assemblies that contain electronic parts.
(a) Sources of electronic parts.
(1) Except as provided in paragraph (a)(2) of this section, the Government requires contractors and subcontractors at all tiers, to—
(i) Obtain electronic parts that are in production by the original manufacturer or an authorized aftermarket manufacturer or currently available in stock from—
(A) The original manufacturers of the parts;
(B) Their authorized suppliers; or
(C) Suppliers that obtain such parts exclusively from the original manufacturers of the parts or their authorized suppliers; and
(ii) Obtain electronic parts that are not in production by the original manufacturer or an authorized aftermarket manufacturer, and that are not currently available in stock from a source listed in paragraph (a)(1)(i) of this section, from suppliers identified by the Contractor as contractor-approved suppliers, provided that—
(A) For identifying and approving such contractor-approved suppliers, the contractor uses established counterfeit prevention industry standards and processes (including inspection, testing, and authentication), such as the DoD-adopted standards at https://assist.dla.mil;
The contractor assumes responsibility for the authenticity of parts
provided by such contractor-approved suppliers (see 231.205-71);
(C) The selection of such contractor-approved suppliers is subject to review, audit, and approval by the Government, generally in conjunction with a contractor purchasing system review or other surveillance of purchasing practices by the contract administration office, or if the Government obtains credible evidence that a contractor-approved supplier has provided counterfeit parts. The contractor may proceed with the acquisition of electronic parts from a contractor-approved supplier unless otherwise notified by DoD.
(2) The Government requires contractors and subcontractors to comply with the notification, inspection, testing, and authentication requirements of paragraph (b)(3)(ii) of the clause at 252.246-7008, Sources of Electronic Parts, if the contractor—
(i) Obtains an electronic part from—
(A) A source other than any of the sources identified in paragraph (a)(1) of this section, due to nonavailability from such sources; or
(B) A subcontractor (other than the original manufacturer) that refuses to accept flowdown of this clause; or
(ii) Cannot confirm that an electronic part is new or not previously used and that it has not been comingled in supplier new production or stock with used, refurbished, reclaimed, or returned parts.
(3) Contractors and subcontractors are still required to comply with the requirements of paragraphs (a)(1) or (2) of this section, as applicable, if—
(i) Authorized to purchase electronic parts from the Federal Supply Schedule;
(ii) Purchasing electronic parts from suppliers accredited by the Defense Microelectronics Activity; or
(iii) Requisitioning electronic parts from Government inventory/stock under the authority of the clause at 252.251-7000, Ordering from Government Supply Sources.
(A) The cost of any required inspection, testing, and authentication of such parts may be charged as a direct cost.
(B) The Government is responsible for the authenticity of the requisitioned electronic parts. If any such part is subsequently found to be counterfeit or suspect counterfeit, the Government will—
(1) Promptly replace such part at no charge; and
(2) Consider an adjustment in the contract schedule to the extent that replacement of the counterfeit or suspect counterfeit electronic parts caused a delay in performance.
(b) Contractor counterfeit electronic part detection and avoidance system.
(1) Contractors that are subject to the cost accounting standards and that supply electronic parts or products that include electronic parts, and their subcontractors that supply electronic parts or products that include electronic parts, are required to establish and maintain an acceptable counterfeit electronic part detection and avoidance system. Failure to do so may result in disapproval of the purchasing system by the contracting officer and/or withholding of payments (see 252.244-7001, Contractor Purchasing System Administration).
(2) System criteria. A counterfeit electronic part detection and avoidance system shall include risk-based policies and procedures that address, at a minimum, the following areas (see the clause at 252.246-7007, Contractor Counterfeit Electronic Part Detection and Avoidance System):
(i) The training of personnel.
(ii) The inspection and testing of electronic parts, including criteria for acceptance and rejection.
(iii) Processes to abolish counterfeit parts proliferation.
(iv) Processes for maintaining electronic part traceability.
(v) Use of suppliers in accordance with paragraph (a) of this section.
(vi) The reporting and quarantining of counterfeit electronic parts and suspect counterfeit electronic parts.
(vii) Methodologies to identify suspect counterfeit electronic parts and to rapidly determine if a suspect counterfeit electronic part is, in fact, counterfeit.
(viii) Design, operation, and maintenance of systems to detect and avoid counterfeit electronic parts and suspect counterfeit electronic parts.
(ix) Flow down of counterfeit detection and avoidance requirements.
(x) Process for keeping continually informed of current counterfeiting information and trends.
(xi) Process for screening the Government-Industry Data Exchange Program (GIDEP) reports and other credible sources of counterfeiting information.
(xii) Control of obsolete electronic parts.
(a)(1) Except as provided in paragraph (a)(2) of this section, use the clause at 252.246-7007, Contractor Counterfeit Electronic Part Detection and Avoidance System, in solicitations and contracts when procuring—
(i) Electronic parts;
(ii) End items, components, parts, or assemblies containing electronic parts; or
(iii) Services, if the contractor will supply electronic parts or components, parts, or assemblies containing electronic parts as part of the service.
(2) Do not use the clause in solicitations and contracts that are set aside for small business.
(b) Use the clause at 252.246-7008, Sources of Electronic Parts, in solicitations and contracts, including solicitations and contracts using FAR part 12 procedures for the acquisition of commercial items, when procuring—
(1) Electronic parts;
(2) End items, components, parts, or assemblies containing electronic parts; or
(3) Services, if the contractor will supply electronic parts or components, parts, or assemblies containing electronic parts as part of the service.